TEC513 - 4 Tonne 2 Post Electro/Hydraulic Hoist

TEC513 - 4 Tonne 2 Post Electro/Hydraulic Hoist

0.00
Add To Cart
TEC513 - 4 Tonne 2 Post Electro/Hydraulic Hoist

TEC513 - 4 Tonne 2 Post Electro/Hydraulic Hoist

TEC513 - 4 Tonne 2 Post Electro/Hydraulic Hoist

The heavy-duty TEC513 is built to lift your workload. Rated at 4 tonne it easily copes with a full range of vehicles from small cars, low clearance, light commercial and off road recreational vehicles. 

The TEC513’s unique asymmetric design allows the vehicles doors to be opened when its on the hoist while allowing the hoists to be positioned closer to the walls maximising workshop space. This feature also enables the car to be elevated above its roof-line, giving you more room to move under the vehicle. 

The hoist features:

  • Built-in mechanical load level correction device that ensures the vehicle remains level at all times.
  • Telescopic lifting arms with quick drop-in extender kits available to cater for high clearance vehicles.
  • Enclosed 360° lifting arm locks secure each arm automatically once the hoist is raised. This system uses an enclosed splined hub and provides fine adjustment of each lifting arm, virtually eliminating dirt fowling the splines.
  • Heavy-duty 415V 3 phase or 240V single phase versions available.
  • Pressure relief and velocity valves provide protection against hydraulic hose and component failures.
  • Carriages run on the inside of the hoist columns ensuring no greasy surfaces are exposed.
  • Carriage safety latches are independently operated and automatically engage in-case of component failure.
  • Clear floor design eliminates tripping hazards. 
  • Compliance with Australian Standard AS1418.9:1996 and is approved for use across Australia and New Zealand.

Hoist Variants:

  • TEC513 - 3620mm - standard hoist height
  • TEC513.1 - 3920mm - 300mm extension kit
  • TEC513.2 - 4220mm - 600mm extension kit

Technical Specifications.

  • Lifting Capacity: 4000kg

  • Maximum Lift Height: 1950mm

  • Minimum Pad Height: 125mm

  • Inside Column Width: 2800mm

  • Electric Motor: 230-400V, 50Hz, 2.2kW

  • Lifting Time: 35 seconds

  • Lowering Time: 35 seconds

  • Noise Level: <70dB

  • Operating Temperature: -10°C to 50°C