TEC.GPMB - Bearing Point Grease Pulse Meter

The Tecalemit Grease Pulse Meter monitors grease flow into critical bearing points protecting them from premature failure.

Installed directly onto the inlet of the bearing and connected to the customer PLC, if the bearing point does not receive the required amount of grease in the correct time period an alarm can be raised to prevent bearing failure and down time.

The metering system is based on a measuring chamber that contains two oval gears. When rotating the pulse signal is monitored by the PLC.

The gears are made to turn by the fluid flowing through the chamber. The volume of fluid that flows through is calculated by the number of gear rotations, given that each rotation corresponds to the identical amount of fluid.

By calibrating the PLC, the pulsed signal is converted into the amount of grease that has been dispensed.

Technical Specifications.

• Product: Grease Grade 000 - 2

• Operating Range: 7250 psi, 500 Bar

• Signal Type: Reed Switch

• Flow: 0.1 - 2.5 L/min

• Pulses per Litre: 1400 (1,400 cc) nominal

• Surface Protection: Aluminium Anodised 

• Electrical Protection: IP65

• Mass: 0.6 KG

• Size: 70L x 75H x 46W mm

• Operating Temperature: - 25 - 85ºC

• Inlet Port: 1/8” BSP Female

• Outlet Port: 1/8” BSP Female

• Electrical Connection: M12 x 1, 4 pin

• Pin 1: + VE Brown

• Pin 2: - VE White

• Max Current: 100mA

• Max Voltage: 28V AC/DC

Extras

TEC.GPMB: Pulse Meter (No Cable)

PT.CABLE: Plug and 2m Cable

PT.CABLE.5M: Plug and 5m Cable