TECDBDIBC - Dual IBC Bund

Secondary containment regulations require that all drums and other primary containers are stored in a bunded area. This area must be able to contain 110% of the largest container or 25% of the total, whichever is the greater.

Store two IBCs (intermediate bulk containers) / bulk boxes on this containment bund to capture leaks, drips and spills. These containment bunds are also known as spill pallets and have been designed by Australians in Australia for our unique and harsh conditions.

Features.

• Dimensions (cm): 260 (l) x 148 (w) x 66 (h).

• Weight: 142 kg.

• Manufactured and tested in Australia with a 3600kg uniformly distributed load.

• Heavy duty Australian made double IBC storage bund to suit 1000 litre IBC’s.

• Polyethylene construction provides excellent corrosion resistance to oils, fuels and a range of chemicals.

• 1470 litre integral spill containment sump.

• Removable four piece polypropylene grated top - allows easy access for cleaning.

• Forklift pockets provide access for easy relocation.

• Store IBC’s directly or palletised on the bund.

• Drain plugs in sump permit spilt liquids to be decanted.

• Load tested in Australia by NATA accredited engineers - dynamic compression test certificate available.

• Oil Filter Bag (optional) can be attached for bund dewatering.

• Use bund cover (optional) to prevent the ingress of water.

Additional Information.

• Side-by-side containment without the cost of buying two single units.

• Chemical resistant polyethylene bund and polypropylene grate can endure harsh environments.

• Removable grated floor allows access to the bund sump for cleaning.

• Includes encapsulated data plates with vital information such as sump capacity, maximum UDL, composition materials and net weight.

• Moulded forklift pockets with dual sided access allow convenient positioning. (Move only when IBC are removed).

• Large deck allows convenient and safe positioning of IBC so the outlet tap is within the sump boundaries.

• Bunds designed to stack inside each other for reduced freight cost of multiple units.

• Optional bund discharge filters are available to allow oil and fuel capture when draining rainwater from the bund. Filter is packed with super absorbent hydrophobic (water-resistant) polypropylene for 30 litres of absorbency. Filter is fitted with an internal flow distributor and quick release camlock adaptor. Replacement filter bags can be ordered individually.